Table of Contents
Advertisement
Topping up the engine oil
approx. 1.1 litre (10W40 or 15W40)
Oil can be added in two places. One of the filling points has a dipstick.
•
Bear in mind: Before draining, place a collection vessel under the backhoe digger.
•
Important! Drained oil should be transported to a location designated by your local authority.
Contact your local authority for further information.
18
Drain plug.
Topping up the hydraulic oil
The oil plug is located under the seat.
Top up the oil tank with hydraulic oil HLP46,
18.5 litres, while keeping an eye
on the oil level gauge.
When the oil has been topped up,
screw the oil plug back into position.
When topped up for the first time,
the oil should be between the black
and red lines on the level gauge.
Then start the engine, move the
control levers. Move all cylinders
to their outermost position and
retract them once, so that they
are filled with oil.
Then fill the tank with oil for
a second time between the black
and red lines.
Table of Contents
Advertisement
Table of Contents
