Retraction/Expansion - PROAIM Powermatic Scissor Pro JB-SCSR-02 Assembly Manual

17ft telescopic camera jib crane

Hide thumbs Also See for Powermatic Scissor Pro JB-SCSR-02:

Table of Contents



Now, tighten the pin of the spiral cable.



Connect the Jib Controller cable to the right

and Motor Driver Cable to the left of the

Battery Plate.



Now,

mount

your

(Not Included)

on the Battery Plate.

NOTE: The system is integrated with a V-Mount

Battery Plate, which adapts a 14.8V V-Mount

battery to power the drive system.



After attaching the V-mount battery, you can

operate the Scissor Jib in 2 alternate ways.

1. If you press the button from battery side, it will

run on the V-mount battery.

2. If you press it from the power side, it will run

on electric power supply.



To power the Scissor Jib connect a 15AC

Adapter pin to the Controller box with battery

plate.

Retraction/Expansion



The

forward/reverse

conveniently push out and pull in the jib arm.

V-Mount

Battery

buttons

let

you

Table of Contents