Starting from the Hub Mounting, insert the
cables into the cable tie.
Now, tighten the cable ties.
NOTE: Maximize the length of scissor jib arm to
ensure that the cables remain spiraled, as shown
in the image.
Attach the Controller Box to the Scissor Jib.
Then insert the Allen bolt into the Controller
box.
After inserting Allen Bolt , secure it using the
Allen key.
Similarly, secure all the bolts using the same
process as above.
Loosen the flower knob of the Controller box,
and then insert the weight rod
Weight Rod & Speed controller Mounting
After positioning the weight rod in the center,
re-tighten it using the flower knob.
Loosen the ratchet knob
Controller and then slide the Speed Controller
Clamp as desired.
After setting the position of the clamp,
re-tighten the knob to secure it.
(Not
Included).
(red)
of the Speed
10