Download
Share
Print this page
PROAIM Powermatic Scissor JB-SCSR-01 Assembly Manual
  1. Manuals
  2. Brands
  3. PROAIM Manuals
  4. Professional Video Accessories
  5. Powermatic JB-SCSR-01
  6. Assembly manual

PROAIM Powermatic Scissor JB-SCSR-01 Assembly Manual

17ft telescopic camera jib crane package
Hide thumbs Also See for Powermatic Scissor JB-SCSR-01:

Advertisement

Quick Links

Download this manual
1
Powermatic Scissor 17ft Telescopic Camera Jib
Crane Package
(JB-SCSR-01)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
3 x Guide Rods
Weight Rod
Hub Locking Knob
Ronin
2 x Weight Closers
Controller
17ft Powermatic Scissor Jib with
Monitor Arm
bracket
Jib Controller
Gimbal Fluid Head
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Powermatic Scissor JB-SCSR-01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PROAIM Powermatic Scissor JB-SCSR-01

Summary of Contents for PROAIM Powermatic Scissor JB-SCSR-01

  • Page 1 Powermatic Scissor 17ft Telescopic Camera Jib Crane Package (JB-SCSR-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
  • Page 2 BNC Wire HDMI Male to Male Wire 15V AC Adapter Female to Female Connector 3 x T-Type Allen Keys 3/16 “ Allen Key (2.5mm , 3mm & 4mm) Female to Female Connector Wrench 18mm Cable Tie Flight Case...
  • Page 3 Anchor dolly with Studio Wheels (DL-ANCR-02) Gravity Stand 3 x Safety Belts Storage Bag for Gravity Stand...

  • Page 4: Safety Hints

    Safety Hints ATTENTION: PLEASE READ THIS BEFORE USING THE CRANE TO PREVENT DAMAGE! Assembly Caution: attentive when assembling Dolly, Tripod & Crane to prevent equipment damage. Avoid assembly under the influence of alcohol or drugs. Watch Your Hands: Operate cautiously to avoid pinching hands or fingers between arms. Ensure secure connection of all Crane sections.
  • Page 5 INDEX Sr. No Particulars Page No. Assembling the Anchor Dolly Attaching Track Wheels Gravity Jib Stand Setup Gravity Stand Mounting on Dolly Scissor Telescopic Camera Jib Crane Setup Weight Rod Setup 10-11 LCD Monitor Arm Setup 11-12 Gimbal Fluid Head Setup Attaching the Cable Tie Final Setup...
  • Page 6 Anchor Dolly Setup Assembling the Anchor Dolly  Loosen both the knobs from the center of the anchor dolly and stretch its legs on the floor.  Then tighten both the knobs to secure the legs. NOTE: To keep the dolly in a static position (non-movable), lock down the wheels by using provided brakes.
  • Page 7 Euro Mount  Feature: Industry standard Euro/Elemac mount threads are available on dolly. You can attach any Euro base accessories like bazooka risers and mount the camera on it. Gravity Jib Stand Setup  Now open the Gravity stand and stretch its legs on the floor as per the requirement.
  • Page 8 Gravity Stand Mounting on Dolly  Now mount the stand on the dolly. NOTE: This excellent combination of Proaim Gravity Tripod Stand and Anchor Dolly is sturdy enough to support the Crane when it's fully loaded and weighed. ...
  • Page 9 FEATURE: You can check the leveling of the Scissor Jib using the Bubble Leveler after which the stand’s height can me adjusted to keep your Jib levelled.  Loosen the bolt of the Gimbal bracket and open it.  Then, insert the two guide rods on either side of the Crane.
  • Page 10 Weight Rod Setup  Insert the Weight rod into the weight holder of the controller box and tighten the knob.  Insert weights into the weight rod. NOTE: Weight will be added according to the setup requirement to balance the camera securely.
  • Page 11  Now, mount your V-Mount Battery (Not Included) onto the Battery Plate. NOTE: The system is integrated with a V-Mount Battery Plate, which adapts a 14.8V V -Mount battery to power the drive system.  After attaching the V-mount battery, you can operate the Scissor Jib in 2 alternate ways.
  • Page 12  Now, the LCD is assembled and ready to use. Gimbal Fluid Head Setup  Slide the Gimbal Fluid Head to the Jib's mounting plate and tighten the knob. NOTE: Gimbal Fluid Head comes attached with the Jib plate. In case it gets detached, you can easily mount it.

  • Page 13: Maintenance

    Attaching the Cable Tie  After completing Scissor Jib installation, retract the jib arm.  Attach cable ties to the hole of each frame.  Starting from the Hub Mounting, insert the cables into the cable tie.  Now, tighten the cable ties. NOTE: Maximize the length of scissor jib arm to ensure that the cables remain spiraled, as shown in the image.
  • Page 14 YOUR PROAIM POWERMATIC SCISSOR 17FT CAMERA JIB CRANE PACKAGE ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.