•
Insert plastic washer and knob from the other
side and tighten the knob securely.
•
7th section is securely attached.
•
Insert locking pin into the 6th section from
the top and lock it securely.
•
Attach 6th section with 5th, 5th section with
4th, 4th section with 3rd, 3rd section with 2nd
and 2nd section with the 1st.
Head Platform Mounting
•
Loosen the bolt of the Head platform and
remove it.
•
Remove plastic washers, steel washers and
shaft collars from the Shank.
•
Mount Head Platform on the 7th section of
the jib.
•
Attach Head platform to the jib section.
•
Now, insert the long bolt and plastic washer.
15