•
Remove the bolt on the base of the Tripod
using the 21mm spanner.
•
Repeat the same step to remove the second
bolt.
Hub Mounting Assembly
•
Mount the Hub Mounting on the Tripod.
NOTE: The Hub Assembly has several mounting
holes for attaching additional accessories like a
LCD Monitor or a Joystick box.
•
Now, re-insert the bolts and tighten them
using the 21mm spanner.
•
Re-insert the plastic washer and pan friction
knob.
•
Tighten the knob properly to secure the
assembly hub.
•
Hub Mounting is now securely mounted on
the jib Stand.
11