Section 7 & Section 6 Assembly - PROAIM Kite-22 Assembly Manual

•
Tighten the shank knob using the 4mm
T-Type Allen key.
•
Insert the locking pin into the 1st section
from the top and lock it securely.
•
Similarly, insert the locking pin into the 2nd
section from the top and lock it securely.
•
The 1st, 2nd and 3rd Section are securely
attached.
•
Repeat this process for attach the remaining
sections.
Jib Section 7th & Section 6th Assembly
•
Insert 7th section into the 6th section and
insert the shank ensuring the holes are
aligned.
14