Phone Finder; Configuring Watch Settings; Changing The Home City Summer Time Setting - Casio 3552 Operation Manual

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
press any button besides (B) to terminate
the connection.
Connected Disconnected
2. X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3. X
Hold down (D) for at least three
seconds. Release the button when
[FIND] start to flash.
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
●
phone tone sounds.
Getting ready to Sounding phone alert
connect with phone
4. X
Press any button besides (B) to stop the
tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Watch Operation Guide 3552

Configuring Watch Settings

Alarm time, timer start time, and other settings
can also be configured using the CASIO
WATCHES phone app.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
●
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
and
e
sound
Changing the Home City
Summer Time Setting
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
and
e
●
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
and
e
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Connected
3. Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
and
e
and
e
Connected
14