Configuring the Auto Light Setting
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (B) for at least three seconds
to toggle Auto Light between enabled and
disabled.
[LT] is displayed while Auto Light is
●
enabled.
On
Note
If you do not disable it manually, Auto
●
Light remains enabled for
approximately six hours. After that, it
becomes disabled automatically.
Watch Operation Guide 3552
Specifying the Illumination Duration
●
You can select either 1.5 seconds or three
seconds as the illumination duration.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This causes the current step reminder
setting ([ON] or [OFF]) to flash on the
display.
3.
Press (C) 10 times to display [LT].
4.
Press (D) to select an illumination
duration.
[1]: 1.5-second illumination
[3]: 3-second illumination
5.
Press (A) to exit the setting screen.
Useful Features
Pairing the watch with your phone makes a
number of the watch's features easier to use.
Auto time correction
Auto Time Adjustment
l
Selection of More Than 300 World Time
cities
Configuring World Time Settings
l
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
Getting Ready
l
Your phone needs to have the "CASIO
●
WATCHES" phone app installed to pair with
the watch.
9