Table of Contents
Advertisement
Configuring Timer Settings
Enter the Calendar Mode and then press
●
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
Set the hours and minutes of the timer
●
start time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time adjustment
is being performed, use CASIO WATCHES to
adjust them.
Enter the Calendar Mode and then press
●
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Watch Operation Guide 5636
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Phone finder will not sound the tone
●
unless the CASIO WATCHES phone
app is running on the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
Hold down (C) for at least one second.
This will cause the watch to enter the
Calendar Mode.
2. X
Hold down (D) for at least five seconds
until the second hand points to [C].
A connection will be established between
the watch and phone, and then the
phone's ringtone will sound.
It will take a few seconds before the
●
phone tone sounds.
3. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
After establishing a connection between the
watch and a phone, you can use CASIO
WATCHES to configure watch settings and to
view information acquired by the watch.
Enter the Calendar Mode and then press
●
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
Enter the Calendar Mode and then press
●
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
13
Advertisement
Table of Contents
