Table of Contents
Advertisement
4.
Configure the date and time settings.
To reset the seconds to 00: Press (D).
●
1 is added to the minutes when the
current count is between 30 and 59
seconds.
For all the other settings, use (B) and (D)
●
to change the flashing setting.
Holding down (B) or (D) scrolls through
settings at high speed.
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 3552
Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This causes the current step reminder
setting ([ON] or [OFF]) to flash on the
display.
3.
Press (C) five times.
This causes [12H] or [24H] to flash on the
display.
4.
Press (D) to toggle the setting between
[12H] (12-hour timekeeping) and [24H]
(24-hour timekeeping).
12-hour timekeeping
5.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Dual Time lets you look up the current time in
various time zones around the globe.
Using CASIO WATCHES to
Configure World Time City
Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the World Time city.
Configuring World Time Settings
l
Note
●
24-hour timekeeping
Configuring Dual Time
Settings
Dual Time lets you set the current time in
another time zone in addition to your current
location time.
1.
2.
3.
Dual Time
World Time cities that can be selected
only by using the CASIO WATCHES
phone app cannot be selected using
watch operations.
Enter the Dual Time Mode.
Navigating Between Modes
l
Hold down (A) for at least two seconds.
Release the button when the hour setting
starts to flash.
Hours
Use (B) and (D) to change the hour setting.
17
Advertisement
Table of Contents
