Phone Finder; Configuring Watch Settings; Changing The Home City Summer Time Setting; Checking The Watch Charge Level - Casio 3541 Operation Manual

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected Disconnected
2. X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3. X
Hold down (D) for at least five seconds.
Release the button when
e
start to flash.
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
●
phone tone sounds.
Getting ready to Sounding phone
connect with phone
4. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Watch Operation Guide 3541

Configuring Watch Settings

Alarm time, timer start time, and other settings
can also be configured using CASIO
WATCHES.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
●
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
and [FIND]
Summer Time Setting
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
alert sound
When a connection is established
●
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with CASIO WATCHES.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
and
e
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
●
and
e
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Connected
Trying to connect
3. Y
Use CASIO WATCHES to check the
charge level.
Recording Your Current
Location (TIME & PLACE)
While traveling or otherwise on the go, you can
use the procedure below to record your
current location, along with the time and date,
on your phone. Recorded location information
can be viewed on a CASIO WATCHES map
and
e
while the watch is connected with your phone.
Recording Your Current Location
●
and
e
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2. X
When you are in the location you want
to record, press (D).
This records, in phone memory, your
latitude and longitude and the current date
Connected
and time, and displays [OK] on the watch.
At this time your current location is
●
recorded by your phone.
and
e
and
e
Connected
13