Phone Finder; Configuring Watch Settings - Casio 3543 Operation Manual

Swapping Your World Time and Home
●
Time
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
●
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
Auto time adjustment does not work for
●
24 hours after swapping of the Home
Time and World Time.
Watch Operation Guide 3543

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
and
e
Important!
and Do not use this function in areas where
e
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
Connected
press any button to terminate the
connection.
Connected
2. X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3. X
Hold down (D) for at least five seconds.
Release the button when
start to flash.
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
●
phone tone sounds.
Getting ready to
connect with phone
4. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.

Configuring Watch Settings

Alarm time, timer start time, and other settings
can also be configured using CASIO
WATCHES.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
seconds. Release the button when
[CNCT] start to flash.
●
●
Trying to connect
Disconnected
3. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
and [FIND]
e
Sounding phone
alert sound
Hold down (C) for at least three
When a connection is established
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Connected
and
e
and
e
13