If You Purchase Another Phone; Time Adjustment; Using Watch Operations To Adjust The Time Setting - Casio 3552 Operation Manual

Deleting Pairing Information from the
●
Watch
1. X
Hold down (C) for at least one second
to enter the Timekeeping Mode.
2.
Hold down (A) for at least two seconds.
This causes the current step reminder
setting ([ON] or [OFF]) to flash on the
display.
3. X
Press (C) twice.
This causes the seconds to flash.
Seconds
4. X
Hold down (B) for at least two seconds.
Release when and [CLR] stop flashing.
e
This deletes the pairing information from
the watch and returns to the timekeeping
display.
5. X
Press (A) to return to the Timekeeping
Mode.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
Deleting Pairing Information from the
l
Watch
Pair the watch with a phone.
l C
Watch Operation Guide 3552

Time Adjustment

Your watch can connect with a phone to obtain
information that it uses to correct its date and
time setting.
Important!
When you are on an aircraft or in any
●
other location where radio signals may
cause problems, enable the watch's
Airplane Mode to disable connection
with your phone.
Using the Watch in a Medical
l
Facility or Aircraft
Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time correction by connecting with your
phone is recommended.
Auto Time Adjustment
l
If your phone cannot connect with the
watch
You can correct time settings by
performing operations on the watch.
Using Watch Operations to Adjust the
l
Time Setting
Using Watch Operations to
Adjust the Time Setting
If your watch cannot connect with your phone
for some reason, you can use watch
operations to adjust date and time settings.
Setting the Time/Date
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This causes the current step reminder
setting ([ON] or [OFF]) to flash on the
display.
3.
Keep pressing (C) until the setting you
want to change is flashing.
Each press of (C) moves the flashing to
●
the next setting in the sequence shown
below.
Step Reminder On/Off
Daily step target
Seconds
Hours
Minutes
12/24-hour timekeeping
Year
Month
Day
Operation tone enable/disable
Illumination duration
Power Saving On/Off
16