Table of Contents
Advertisement
Configuring Timer Settings
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
3.
Y Perform the operation shown on the
phone screen to configure the timer time
setting.
Setting the Alarm
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
3.
Y Perform the operation shown on the
phone screen to configure alarm time
settings.
Operation Guide 5560
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use CASIO WATCH+ to
adjust them.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
3.
Y Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in the
manner mode.
Important!
Do not use this function in areas
●
where phone call tones are
restricted.
The tone sounds at a high volume.
●
Do not use this function when
listening to phone output over
earphones.
1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2.
X Hold down (A) for about two seconds.
This will cause the watch to enter the
Calendar Mode.
3.
X Hold down (D) for about 1.5 seconds
until the second hand points to [R].
The second hand will move to e when a
connection is established between the
watch and phone, and then the phone's
ringtone will sound.
4.
X Press any button to stop the tone.
Configuring Watch Settings
You can use CASIO WATCH+ to specify the
amount of time until a Bluetooth connection is
automatically terminated, to enable or disable
the watch operation tone, and to configure
other settings.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down (C) for about two seconds.
3.
After disconnection
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
It will take a few seconds before the
●
phone tone sounds.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
8
Advertisement
Table of Contents
