Table of Contents
Advertisement
Checking Your Progress to Your Daily
●
Step Target
The graphic display area shows your current
progress toward achieving the daily step
target specified by you.
Also, [GOAL] flashes when you attain your
daily step target.
Example: Daily target of 10,000 steps
0 steps
1,000 steps
5,000 steps
10,000 steps (goal attained)
To check the step count
●
Displaying the Step Count
l
Displaying the Step Count
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Use the (A) phone app to change to the
step count display.
Day of the week
Step count graph
Step count goal
Step count goal
progress
Year, month, day
Daily step count
Note
If the watch is connected to a phone
●
and app info receive is turned on, the
app info screen also appears.
Selecting a Timekeeping Mode
l
Digital Display Format
Watch Operation Guide 3552
Interpreting the Step Count Graph
●
The Step Count Graph shows the number of
steps (up to 1,000) you have taken each hour.
This lets you easily check your walking pace
over the past 7 or 8 hours.
The Step Count Graph is not displayed
●
while the step count is zero.
Graph contents are normally updated at the
●
top of each hour.
Step count
1001‒
751‒1000
501‒ 750
251‒ 500
1‒ 250
Note
The step count can show a value up to
●
999,999 steps. If the step count
exceeds 999,999, the maximum value
(999,999) remains on the display.
To prevent miscounts, the displayed
●
count does not increase for about 18
seconds after you start walking. After
you have been walking for about 18
seconds, the correct count appears,
including the steps you took during the
previous 18 seconds.
The step count is reset to zero at
●
midnight each day.
To save power, step counting stops
●
automatically if you take off the watch
(no detectable watch movement) and
you do not perform any operation for
two or three minutes.
Graph contents are also updated when
●
any one of the events below occurs.
When accelerometer operation is
ー
stopped to save power
When counting is not possible due
ー
to accelerometer error or insufficient
power
progress
Current
7
6
5 4
3
2
1
Time
Resetting Today's Step
Count
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (B) and (D) for at least two
seconds. Release when [CLR] and the
step count stop flashing.
This resets the step count.
Specifying a Daily Step
Target
You can specify a daily step goal within the
range of 1,000 to 50,000, in units of 1,000
steps.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This causes the current step reminder
setting ([ON] or [OFF]) to flash on the
display.
3.
Press (C).
This causes the current daily step target
to flash.
4.
Use (B) and (D) to specify a step count
target value.
5.
Press (A) to complete the setting
operation.
24
Advertisement
Table of Contents
