Phone Finder; Configuring Watch Settings; Changing The Home City Summer Time Setting; Connection - Casio 5601 Operation Manual

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
press any button besides (L) to terminate
the connection.
After the connection is terminated, the
●
watch will return to the mode it was in
before connection was established.
Example: After connecting from the
Timekeeping Mode
Connected Disconnected
2. X
Hold down (B) for at least five seconds
until the second hand points to [R] three
times.
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
●
phone tone sounds.
Searching for phone
3. X
Press any button besides (L) to stop the
tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Operation Guide 5601

Configuring Watch Settings

You can use CASIO WATCHES to configure
the settings below.
Timer start time
●
Alarms
●
Digital Compass
●
Altimeter
●
Barometer
●
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Connected
Changing the Home City
Summer Time Setting
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect

Connection

3. Y
successful Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
l C
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
Connection
successful
Pair the watch with a phone.
Connection
successful
15