Phone Finder; Configuring Watch Settings; Connection; Connecting With A Phone - Casio G-Shock GBD-200 Nero Operation Manual

Phone Finder

You can use phone finder to trigger a sound
on the paired phone to help you find it. The
sound operation is performed even if your
phone is in vibrate mode.
Important!
Phone finder will not sound the tone
●
unless G-SHOCK MOVE is running on
the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2. X
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. X
Use (A) and (C) to move the pointer to
[PHONE FINDER].
4. X
Press (B).
5. X
Use (A) and (C) to move the pointer to
[EXECUTE].
6. X
Press (B).
This will establish a connection between
the watch and phone, and sound the
phone's ringtone.
It will take a few seconds before the
●
phone tone sounds.
7. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Watch Operation Guide 3506
Note
Connection with your phone is not
●
possible while the watch's Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
Using the Watch in a Medical
l
Facility or Aircraft

Configuring Watch Settings

After establishing a connection between the
watch and a phone, you can use G-SHOCK
MOVE to configure watch settings and to view
information acquired by the watch.
Check the connection
Make sure that the
●
the watch display when you perform the
procedure below.
If is not displayed, refer to the
e
●
information at the link below.

Connecting with a Phone

l
1. Y
Tap the "G-SHOCK MOVE" icon.
2. Y
On the menu bar, tap "More".
3. Y
Tap "Watch".
4. Y
Select your preferred watch.
5. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Your watch can connect with a phone that is
paired with it.
symbol is shown on
e
Unpairing the watch from a phone requires
both G-SHOCK MOVE and watch operations.
●
1. X
2. Y
3. Y
4. Y
5. Y
6. Y
7. Y

Connection

Connecting with a Phone
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
Important!
If you have problems establishing a
●
connection, it could mean that G-
SHOCK MOVE is not running on your
phone. On your phone's home screen,
tap the "G-SHOCK MOVE" icon.
Perform the operation shown on the
screen to pair with the watch.

Unpairing

Note
If you are using an iPhone, also delete
●
the pairing information stored on the
phone.
Deleting Pairing Information from G-
SHOCK MOVE
If the watch is connected with a phone,
enable the watch's Airplane Mode.
Using the Watch in a Medical Facility or
l
Aircraft
Tap the "G-SHOCK MOVE" icon.
On the menu bar, tap "More".
Tap "Watch".
Tap "Manage".
Tap the watch you want to unpair.
Perform the operation shown on the
screen.
14