Receiving Casio Watches Information On The Watch; Configuring Power Saving Function Settings - Casio 3552 Operation Manual

Triggering Immediate Time Correction
●
The watch's time setting will be corrected
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
correction, perform the procedure below to
connect with a phone.
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Move the phone close to (within one meter
of) the watch.
3. X
Press (D).
[TIME] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] will appear, and then the
watch will correct its time setting based on
information from the phone.
At this time your current location is
●
recorded by your phone.
Trying to connect After time adjustment
Note
The connection is terminated
●
automatically after time correction is
complete.
If time correction fails for some reason,
●
[ERR] will appear.
Watch Operation Guide 3552
Receiving CASIO WATCHES
Information On the Watch
You can configure settings so the watch
receives CASIO WATCHES update and other
information whenever it connects with a phone
to adjust its current time setting.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
●
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on your
phone screen to enable app info receive.
Note
If app info receive is turned on, the
●
watch receives CASIO WATCHES
information as described below.
Each time the watch automatically
ー
adjusts its time setting (four times a
day)
When you press (D) in the
ー
Timekeeping Mode to adjust the
watch time setting
When you hold down (C) for at least
ー
three seconds to connect the watch
with a phone.
When CASIO WATCHES information
●
is received while the watch is in the
Timekeeping Mode, the watch
automatically switches to the app info
screen.
Normal Timekeeping
e
and
e
Connected
App Info Screen
Display
Configuring Power Saving
Function Settings
You can use the CASIO WATCHES phone
app to enable or disable power saving.
For details about power saving, refer to the
●
information below.
Power Saving
l
1. Y
Tap the "CASIO WATCHES" icon.
2. X
and
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
●
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Follow the displayed instructions to turn
power saving on or off.
and
e
and
e
Connected
11