Volume Control; Use Headphones; Display Indications - TechniSat Transita 121 IR Operating Instructions Manual

8.3 Volume control

> To change the volume, turn the VOLUME/ON/STANDBY knob.
> Turn the knob clockwise to increase the volume or counterclockwise
to decrease it.

8.4 Use headphones

Warning of hearing damage!
Do not listen to the radio at high volume through headphones. This can lead to permanent
hearing damage. Before using headphones, set the volume of the device to minimum. If you
connect headphones (not supplied), the unit's speaker will be muted.
> Only use headphones with a 3.5 mm stereo jack plug.
> Insert the headphone plug into the headphone socket (2) on the back of the radio.
Sound is now only played through headphones.
> If you want to listen through the speaker again, remove the headphone plug
from the headphone socket on the device.
8.5 Display
Current source
Station name,
title, artist, additional
information, menu,
lists
> Press the INFO button to browse through the various information displayed.
Depending on the selected source/channel, different information is available.
Depending on the function/source selected, the display may vary. Pay attention to
the information on the display.
Time
Status bar
Radio reception and
Wi-Fi, battery level,
alarm clock, favourites
Seite 15