Chapter 2 Installation Safety Warnings - Mellanox Technologies InfiniScale MIS5022Q-1BRR User Manual

Rev 1.4
2 Installation Safety Warnings
Warnings in French can be found on page 45. Warnings in German can be found on page 48.
Warnings in Spanish can be found on page 52.
1. Installation Instructions
2. Over-temperature
3. Stacking the Chassis
4. Double pole / Neutral Fusing
5. During Lightning - Electrical Hazard
6. Copper Cable Connecting/Disconnecting
12 Mellanox Technologies
Read all installation instructions before connecting the equipment to the power source.
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: 45°C (113°F). Moreover, to guarantee proper air
flow, allow at least 8cm (3 inches) of clearance around the ventilation openings.
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
This system has double pole/neutral fusing. Remove all power cords before opening
the cover of this product or touching any internal parts.
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
Copper cables are heavy and not flexible, as such they should be carefully attached to
or detached from the connectors. Refer to the cable manufacturer for special warnings/
instructions.
Installation Safety Warnings