Mellanox Technologies InfiniScale MIS5022Q-1BRR User Manual page 14

Rev 1.4
14. Interconnection Of Units
15. Suitable Enclosure
16. UL Listed and CSA Certified Power Supply Cord
17. Do Not Use the Switch as a Shelf or Work Space.
18. WEEE Directive
14 Mellanox Technologies
Cables for connecting to the unit RS232 and Ethernet Interfaces must be UL
certified type DP-1 or DP-2. (Note- when residing in non LPS circuit)
Overcurrent Protection: A readily accessible Listed branch circuit overcurrent
protective device rated 20 A must be incorporated in the building wiring.
Suitable electrical, mechanical and fire enclosure shall be provided by the 
end product manufacturer and or the end user.
For North American power connection, select a power supply cord that is UL Listed
and CSA Certified, 3 - conductor, [16 AWG], terminated with a molded plug rated at
125 V, [13 A], with a minimum length of 1.5m [six feet] but no longer than 4.5m.
For European connection, select a power supply cord that is internationally 
harmonized and marked "<HAR>", 3 - conductor, minimum 1.0 mm 2 wire,
rated at 300 V, with a PVC insulated jacket. The cord must have a molded plug
rated at 250 V, 10 A.
Caution: Slide/rail mounted equipment is not to be used as a shelf or a work space. The
rails are not intended for sliding the unit away from the rack. It is for permanent instal-
lation at final resting place only, not used for service and maintenance.
According to the WEEE Directive 2002/96/EC, all waste electrical and electronic
equipment (EEE) should be collected separately and not disposed of with regular
household waste.
Dispose of this product and all of its parts in a responsible and environmentally
friendly way.
Installation Safety Warnings