Operation Guide 5603 Before Getting Connecting with a Paired Phone ● E Battery level Started... Hold down (B) until the second hand points to Pushing the crown back in after pulling it out [C] twice. will cause the mode hand to indicate the...
Operation Guide 5603 Stopwatch Mode Common Operations in All Modes Fast Forward/Fast Reverse ● ● ● The second hand, and the small hour and After pulling out the crown to the first or second minute hands indicate the elapsed stopwatch...
Operation Guide 5603 Checking the Charge Level Dead Battery Solar Charging ● Pushing the crown back in after pulling it out All hands and the day indicator are stopped. This watch runs on power supplied from a will cause the mode hand to indicate the rechargeable (secondary) battery that is current charge level.
Getting Ready Other than the above. Your phone needs to have the CASIO ● If you are unable to connect with a phone “OCEANUS Connected” app installed to and are unable to receive a time signal, pair with the watch.
Operation Guide 5603 Appropriate Signal Reception Time Calibration Signal Reception Time Adjustment Using a Location Ranges Time Signal A time calibration signal can be received while Time calibration signal reception is supported the watch is near a window. in the areas shown below.
Operation Guide 5603 Auto Time Calibration Signal Using Watch Operations to Note Receive Adjust the Time Setting An automatic time calibration signal receive The receive operation takes anywhere ● operation is performed and the time and day from about two minutes to about 10...
Operation Guide 5603 Configuring the Summer Time Checking the Last Time Rotate the crown to move the second Setting (Home City) Adjustment Result hand to the desired setting for the year If you are in an area that observes summer ten’s digit.
A Install the required app on your phone. In Google Play or the App Store, search for the Note CASIO “OCEANUS Connected” app and install it on your phone. Within 10 seconds after pressing (B) The first time you start up OCEANUS ●...
Operation Guide 5603 Configuring the Summer Time Setting Configuring World Time ● Important! Settings Y Tap the “OCEANUS Connected” icon. The watch may not be able to perform ● X Hold down (B) until the second hand auto time adjustment under the Specifying a World Time City with OCEANUS points to [C] twice.
Operation Guide 5603 Swapping Your World Time and Home ● Adjusting Hand and Day Time X Hold down (B) until the second hand Indicator Alignment points to [C] three times. Y Tap the “OCEANUS Connected” icon. A connection will be established between...
Operation Guide 5603 Canceling a Connection with a Changing the Home City Connection Phone Summer Time Setting Connecting with a Phone Pressing any button terminates the Bluetooth connection and returns the second hand to its Y Tap the “OCEANUS Connected” icon.
Operation Guide 5603 World Time Unpairing Configuring the Summer Time Setting (World Time) Unpairing the watch from a phone requires World Time lets you look up the current time both OCEANUS Connected and watch in any one of 27 cities and 38 time zones If you are in an area that observes summer operations.
Operation Guide 5603 Stopwatch Swapping Your Home City Note Time and World Time The stopwatch measures elapsed time in units The (B) button operations below can ● of one second up to 23 hours, 59 minutes, 59 In the World Time Mode, hold down (A) for be performed while an elapsed time seconds (24 hours).
Operation Guide 5603 Adjusting Hand and Day Note If the small hour and minute hands, and Indicator Alignment the small 24-hour hand are not at 12 Leaving the crown pulled out for more o’clock, rotate the crown to align them with ●...
Operation Guide 5603 Other Information After Arriving ● Summer Time Table Swap the origin time zone time with the This section provides non-operational When “AT (AUTO)” is selected for a city that destination time zone time. information you also need to know. Refer to observes summer time, switching between this information as required.
Measuring unit: 1 second For information about phones that can Legal Precautions ● Measuring capacity: 23:59’59” (24 hours) connect with the watch, visit the CASIO This watch complies with or has received Measuring functions: Elapsed time ● website. approval under the radio laws of various Other : https://world.casio.com/os_mobile/wat/...
Bluetooth SIG, Inc. and any use of such Setting a Home Time City Adjust hand and/or day indicator marks by CASIO Computer Co., Ltd. is alignment. under license. After checking the above, the watch still Adjusting Hand and Day Indicator iPhone and App Store are registered ●...
Page 19
Home Screen, tap the “OCEANUS For information about supported phone Connected” icon. Then on the watch, hold Settings models, visit the CASIO Website. down (B) until the second hand points to [C] twice. https://world.casio.com/os_mobile/wat/ The second hand will point to [C] once ●...
Page 20
Operation Guide 5603 Phone-Watch Connection Auto Time Adjustment by Hand Movement and Bluetooth Connection (Time Indications Adjustment) I can’t establish a connection between the phone and watch. I don’t know what mode the watch is When does the watch adjust is time?
Page 21
Operation Guide 5603 Why is the current time indicated by the watch is off by a certain amount of time (nine hours, three hours and 15 minutes, etc.)? The city setting is not correct. Select the correct setting. Setting a Home Time City...
Need help?
Do you have a question about the 5603 and is the answer not in the manual?
Questions and answers