Viewing The Face In The Dark; Useful Features - Casio 5601 Operation Manual

Viewing the Face in the Dark

The face of the watch can be illuminated for
viewing in the dark.
To illuminate the face manually
●
Pressing (L) turns on illumination.
Illumination will turn off automatically if an
●
alarm starts to sound.
To illuminate the face when Auto Light
●
is enabled
If Auto Light is enabled, face illumination will
turn on automatically whenever the watch is
positioned at an angle of 40 degrees or more.
Important!
Auto Light may not operate properly
●
when the watch is at a horizontal angle
of 15 degrees or greater from
horizontal as shown in the illustration
below.
Electro-static charge or magnetism
●
can interfere with proper auto light
operation. If this happens, try lowering
your arm and then angle it towards
your face again.
When moving the watch you may note
●
a slight rattling sound. This is due to
operation of the auto light switch,
which determines the current
orientation of the watch. It does not
indicate malfunction.
Operation Guide 5601
Note
Auto Light is disabled when any one of
●
the conditions below exists.
Alarm, timer alert, or other beeper
ー
sounding
Hand movement operation is in
ー
progress
Watch in the Compass Mode
ー
Configuring the Auto Light Setting
●
Holding down (L) for at least three seconds in
the Timekeeping Mode toggles Auto Light
between enabled and disabled.
[LT] is displayed while Auto Light is
●
40
enabled.
degrees
If you do not disable it manually, Auto Light
or more
●
remains enabled for approximately six
hours. After that, it becomes disabled
automatically.
On
Specifying the Illumination Duration
●
You can select either 1.5 seconds or three
seconds as the illumination duration.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (D) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Press (E) three times so [LT] is displayed.
4.
Press (A) to toggle between the two
illumination duration settings.
[1]: 1.5-second illumination
[3]: 3-second illumination
5.
Press (D) twice to exit the setting screen.

Useful Features

Pairing the watch with your phone makes a
number of the watch's features easier to use.
Auto time adjustment
Auto Time Adjustment
l
Selection of More Than 300 World Time
cities
Configuring World Time Settings
l
Data transfer to a phone
Viewing Step Count Data
l
Home City
6