Using The Watch In A Medical Facility Or Aircraft - Casio 5601 Operation Manual

Setting the Time/Date
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (D) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Press (D).
This causes the seconds to flash.
4.
Keep pressing (E) until the setting item
you want to change is selected.
Each press of (E) moves to the next
●
setting item in the sequence shown
below.
Seconds
Hours
Minutes
Year
Month
Day
5.
Configure the date and time settings.
To reset the seconds to 00: Press (A). 1
●
is added to the minutes when the
current count is between 30 and 59
seconds.
Use (C) and (A) to change the other
●
settings.
6.
Repeat steps 4 and 5 to configure time
and date settings.
7.
Press (D) to exit the setting screen.
Operation Guide 5601
Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (D) for at least two seconds.
Release the button when the name of the
Home City
currently selected Home City appears on
the display.
3.
Press (E) four times.
This causes [12H] or [24H] to flash on the
display.
4.
Press (A) to toggle the setting between
[12H] (12-hour timekeeping) or [24H] (24-
hour timekeeping).
12-hour timekeeping
5.
Press (D) twice to exit the setting screen.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
1.
Enter the Timekeeping Mode.
Home City
l
2.
Hold down (D) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Press (E) five times.
This displays [RCV].
24-hour timekeeping
4.
Press (A) to select the auto time
adjustment setting you want.
[OFF]: Auto time adjustment disabled.
[ON]: Auto time adjustment enabled.
5.
Press (D) twice to exit the setting screen.
Note
●
Navigating Between Modes
Home City
If the watch is paired with a phone,
CASIO WATCHES can be used to
disable auto time adjustment.
Using CASIO WATCHES to
l
Disable Auto Time Adjustment
8