Time Adjustment; Using Watch Operations To Adjust The Time Setting - Casio 5601 Operation Manual

Use your phone to check the distance and
bearing to a point in Location Memory
Checking the Distance and Bearing to a
l
Location Memory Point (Location Indicator)
Use your phone to record route waypoints
and their altitudes
Recording Waypoints and Their Altitudes
l
(Route Log)
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
Getting Ready
l
Your phone needs to have the CASIO
●
"CASIO WATCHES" app installed to pair
with the watch.
Operation Guide 5601

Time Adjustment

Your watch can connect with a phone to obtain
information that it uses to adjust its date and
time setting.
Important!
Disable Auto Time Adjustment when
●
you are on an aircraft or in any other
location where radio signals may
cause problems.
Using CASIO WATCHES to
l
Configure Settings
Using Watch Operations to
l
Configure Settings
Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time adjustment by connecting with your
phone is recommended.
Auto Time Adjustment
l
If your phone cannot connect with the
watch
You can adjust time settings by
performing operations on the watch.
Using Watch Operations to Adjust the
l
Time Setting
Using Watch Operations to
Adjust the Time Setting
If your watch cannot connect with a phone for
some reason, you can use watch operations
to adjust date and time settings.
Setting a Home City
●
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
enable or disable summer time.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (D) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Use (A) and (C) to change the Home City.
For details refer to the information
●
below.
City Table
l
4.
Press (E).
5.
Use (A) to select a summer time setting.
Each press of (A) cycles through available
settings in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
6.
Press (D) twice to exit the setting screen.
Home City
7