DCS BE1-48RCI Installation Manual page 19

Use only a Ground Fault Interrupter (GFI) protected circuit with this product. An outdoor
120VAC 15A GFI electrical outlet must be installed by a qualified electrician.
INSTALL TRANSFORMER
1. Fit the transformer to
the bracket using the
supplied screws.
2. Install the transformer in a
dry, accessible location away
from excessive heat.
3. Connect power cable to grill.
Do not connect power cable to
transformer until full install is
complete.
Additional DCS products
can be linked to the grill by
attaching a DCS Outdoor
Interconnectivity kit.
19