DCS BE1-48RCI Installation Manual page 32

Each burner is tested and adjusted before shipping. It should not be necessary to make
adjustments, however local gas variations and altitude may effect burner performance at
low setting.
32
BURNER LOW FLAME ADJUSTMENT
1. Light the burners before
turning the dial to
dial to remove from the grill.
2. Hold the control valve shaft
using pliers and insert a long
thin flat screwdriver.
Rotate clockwise to lower,
and counter-clockwise to
increase flame.
3. Refit dial ensuring it is in the
position. Do not force.
LOW
. Pull
LOW