DCS BE1-48RCI Installation Manual page 31

BURNER AIR INTAKE ADJUSTMENT
1. Turn off gas supply and
ensure the burners are cool
to touch.
Grip the burner and use a
screwdriver to open the tab
underneath. Lift the burner out
and remove.
2. Using a Phillips screwdriver,
loosen the burner shutter
screw and turn shutter to
desired position.
Turning clockwise restricts
airflow. Turning counter-
clockwise allows more airflow.
3. Refit the burner ensuring it
is level and located correctly
in the rear mount. Tighten the
shutter screw before lighting.
Light the burner to
recheck flames.
Burners must be properly
located to ensure
safe operation.
31