Leak Testing - DCS BE1-48RCI Installation Manual

Do not smoke while leak testing and extinguish all open flames. Check with a full cylinder
and make sure all dials are

LEAK TESTING

.
OFF
1. Open the gas cylinder valve.
2. Apply a soap solution of
1:1 liquid soap and water to
all connections, hoses and
fittings from the cylinder to the
connection at the grill.
3. If a leak is present,
immediately turn off the gas
supply, tighten any leaking
connections and re-check. If
you cannot stop a gas leak,
turn off the gas supply and
call your local gas utility, or
the dealer you purchased the
appliance from.
Soap bubbles will appear
where gas is escaping.
29