Conair TS Series User Manual page 47

C o n t r o l Pa g e Pa r a m e t e r D e s c r i p t i o n s
( c o n t i n u e d )
Manual Functions.
Raise saw: Pressing this button will raise the saw blade up through the table. Releasing
this button will lower the saw blade. This button is only active when the
saw is not running in automatic.
Clamp: Pressing this button will lower the product clamp. Releasing this button
will retract the product clamp. This button is only active when the saw is
not running in automatic.
Table position: This display field shows the table actual position.
Table jog: These buttons will jog the table in the direction shown by the arrow under-
neath the button. Press and hold the button to jog the table. Release the
button to stop the table.
Jog speed: This data entry field will adjust the table jog speed.
Jog accel: This data entry field will adjust the table jog acceleration rate.
Jog decel: This data entry field will adjust the table jog deceleration rate.
O p e r a t i o n l 4 a - 2 3