4 a - 2 2
l O p e r a t i o n
C o n t r o l Pa g e Pa r a m e t e r D e s c r i p t i o n s
( c o n t i n u e d )
Timers From Menu Screen
On the home screen in Timer mode, pressing the "Info" button,
button
will display the Timers Screen. Pressing the data entry field on this screen dis-
plays the window to enter the setting.
Start delay:
This data entry field sets the amount of time the saw will dwell after
the saw start pushbutton is pressed, entering automatic. This delay
time allows time for the saw blade to ramp up to the running speed.
Saw raise delay:
This data entry field sets the amount of time the saw will wait for
the clamps to close, after the table reaches line speed and the
clamps have been energized.
Table return delay:
This data entry field sets the amount of time the saw will wait for
the clamps to open, after the cut is complete and the table has
stopped and the clamps have been deenergized.
Dump table delay:
This data entry field sets the time after the cut cycle is complete and
when the dump table output will turn on.
Dump table duration: This data entry field sets the amount of time the dump table output
will remain on.
then the "Timers"