Conair TS Series User Manual page 115

C h e c k i n g E l e c t r i c a l C o n n e c t i o n s
3 Open the electrical enclosure.
4 Inspect all wires and connections. Look for loose wires, burned contacts, and signs of
over-heated wires. Have a qualified electrician make any necessary repairs or replace-
ments.
5 Close the electrical enclosure door.
6 Inspect the exterior power cords. Cords should not be crimped, exposed, or rubbing
against the frame. If the main power cord runs along the floor, make sure it is not posi-
tioned where it could rest in pooling water or could be run over and cut by wheels or
casters.
( c o n t i n u e d )
M a i n t e n a n c e l 5 - 7