Table of Contents
Advertisement
Registering Cameras Individually (IP/Serial Connection)
Connect and register an individual camera via IP or serial connection (NU Protocol). Up to 5 cameras connected by serial
connection can be registered.
Select the SYSTEM > [Camera Connect. Details] tab.
1
2
Select the registration destination (camera number) from [Camera].
• For cameras connected by serial connection, select Camera 1 (RS-422 1 terminal) to Camera 5 (RS-422 5
terminal), depending on the RS-422 terminal used for connection.
• Touch
on the right of the screen to apply the camera number of the currently selected camera.
Select [Connection Type] > [IP], [Serial] or [None].
3
• Subsequent steps are not required for options other than IP connection.
Select [Search].
4
• Cameras in the same network that are not registered to the selected group are searched and displayed in a
list.
• When configuring network settings manually, proceed to step 6.
Select a camera from the list.
5
• Selects the cameras to be registered.
Input the required network settings manually.
6
– [IP Version]
– [IPv4 Address]
– [IPv6 Address]
– [Administrator Name/User Name]
– [Password]
– [SSL Communications]
– [Port No.]
• For reference: "Inputting the IP Address" (P. 41)
Select [Apply].
7
"Inputting Characters" (P. 34)
40
Advertisement
Table of Contents
