Canon RC-IP1000 User Manual page 77

OSD
Perform setting related to onscreen displays superimposed on the camera's SDI/HDMI output video signal. Not
available when the camera is using a serial connection (NU Protocol).
In the following setting items, "XXX" indicates the camera's video output terminal.
Setting item
Focus Guide
OSD Output: XXX
OSD Opacity
Opacity Level
Peripheral Border
DISP Level
DISP Level 1
DISP Level 2
Assistance
Perform setting related to shooting assistance displays superimposed on the camera's SDI/HDMI output video signal.
Not available when the camera is using a serial connection (NU Protocol).
In the following setting items, "XXX" indicates the camera's video output terminal.
Setting item
Peaking: XXX
Peaking
Peaking 1: Color
Peaking 1: Gain
Peaking 1: Frequency
Peaking 2: Color
Peaking 2: Gain
Peaking 2: Frequency
Markers: XXX
Center Marker
Horizontal Marker
Vertical Marker
Grid Marker
Center Marker Type
Aspect Marker
Safe Area Marker
Marker Aspect Ratio
Marker Custom Asp. Ratio
Basis for Marker Safe Area
Marker Safe Area %
Setting values/description
Off, On
Off, On
Off, On
25.0%, 37.5%, 50.0%, 62.5%, 75.0%
Off, On
DISP Level 1, DISP Level 2
All Displays, All Displays (Periph. Border)
Shooting Information Display, Markers & Focus Frame
Setting values/description
Off, On
Peaking 1, Peaking 2
White, Red, Yellow, Blue
0 to 15
1 to 4
White, Red, Yellow, Blue
0 to 15
1 to 4
Off, On
Yellow, Blue, Green, Red, Black, Gray, White, Off
Cross 1, Cross 2, Dot 1, Dot 2
Yellow, Blue, Green, Red, Black, Gray, White, Mask 100%, Mask 75%, Mask 50%,
Mask 25%, Off
4:3, 13:9, 14:9, 16:9, 1.375:1, 1.66:1, 1.75:1, 1.85:1, 1.90:1, 2.35:1, 2.39:1, 9:16,
Custom
Sets the aspect ratio used when [Marker Aspect Ratio] is set to [Custom].
Whole Picture, Selected Aspect Marker
80% (Side Length), 88% (Side Length), 90% (Side Length), 93% (Side Length), 95%
(Side Length), 80% (Area), 90% (Area), 92.5% (Area), 95% (Area)
77