Canon RC-IP1000 User Manual page 13

Pan/Tilt Operation Area
19
Pan/Tilt Operation Area ENABLE Button
Switches the pan/tilt operation mode between
pan/tilt mode and cropping frame adjustment
mode.
Additionally, pressing and holding down the button
disables operation of the pan/tilt operation area.
Condition
Pan/tilt mode
Cropping frame
adjustment mode
Operation disabled
20
PAN / TILT Lever
Pan/tilt control. The pan/tilt operation speed
changes according to the pan/tilt SPEED dial
settings and the inclination of the PAN / TILT lever.
• You can change the operation direction for
[Pan Direction] and [Tilt Direction] (P. 62) in the
SYSTEM menu.
• During cropping frame adjustment mode
(P. 55), it is used to adjust the position of the
cropping frame.
19 20
Illumination
(Orange light on)
(Green light on)
(Off)
13
21
22
23
21
USER 5 Button
Performs the function assigned to the button.
22
F5 Dial
Performs the function assigned to the dial. The
operation direction and speed of the assigned
function is adjusted from [F5 Direction] /
[F5 Speed] (P. 62) in the SYSTEM menu.
23
Pan/Tilt SPEED Dial
Adjusts the operation speed of the PAN / TILT lever
(for pan/tilt adjustment and cropping frame
position adjustment).