Table of Contents
Advertisement
System
Setting item
Initial Screen
Language
Operation Mode
PoE+ Restrictions
LCD Brightness
LED Brightness
Operation Volume
SDI Output
HDMI Output
Export
Import Target
Import
Initialize
Update Firmware
LCD White Balance
Setting values/description
Status, USER 1-10, Camera List, Control, Preset List
Selects the top menu's screen to be displayed at startup.
English, 日本語
Selects the displayed language.
Selects functions that can be operated, in order to prevent accidental operation.
Full Control: All operations are possible.
Camera Control: Allows control for all camera settings.
PTZ Control: In addition to the PTZ operator, PTZ-related settings such as preset/
trace editing are available.
PTZ Operator: Only pant/tilt/zoom/focus/iris controls can be operated.
Selects restricted functions when using PoE+ to supply power to the device.
Disable Rear USB: The rear USB terminal cannot be used.
LCD/LED Bright. Restrict.: [LCD Brightness] and [LED Brightness] are restricted to
a maximum value of 15 and 10 respectively.
1 to 20 (10)
Selects the brightness of the LCD panel.
0 to 15 (7)
Selects the brightness of self-illuminated buttons.
0 to 5 (2)
Selects the operation volume.
Selects the SDI OUT terminal's output video selection method.
Through: Outputs SDI video as is (no onscreen displays).
Auto (SDI Priority): If there is SDI input video, it is output. If there is no SDI input
video, IP input video is output.
Auto (IP Priority): In case of IP camera connection, IP input video is output. Other-
wise, SDI input video is output.
Selects the HDMI OUT terminal's output video selection method.
SDI: SDI input video is output as is. Superimposing onscreen displays (focus
frame, cropping frame) is possible.
Auto (SDI Priority): Same as [SDI Output].
Auto (IP Priority): Same as [SDI Output].
Saves device settings information (rcip1000.dat) to the USB memory.
Settings that are not recorded when the power is turned off are not saved.
All, Non-Network
Selects which settings loaded from the USB memory are applied to the device. If
[Non-Network] is selected, all settings are applied except for those of the [Network]
tab.
Loads settings information (rcip1000.dat) stored on the USB memory and updates
the device's settings.
Resets the device to default settings.
Updates the device's firmware.
R Gain, G Gain, B Gain: -100 to 0 (0)
Adjusts the LCD panel's white balance.
63
Advertisement
Table of Contents
