Canon RC-IP1000 User Manual page 75

Setting item
CC: Select Area*
Assist*
Area A: Setting Phase*
Setting Chroma*
Setting Area*
Setting Y Level*
Revision Level*
Revision Phase*
Area B: Setting Phase*
Setting Chroma*
Setting Area*
Setting Y Level*
Revision Level*
Revision Phase*
* Not supported during serial connections (NU Protocol).
PTZ/IS
Setting item
Digital Zoom
Digital Tele-Converter
Pan/Tilt Acceleration*
Image Stabilizer
Digital Image Stabilizer*
* Not supported during serial connections (NU Protocol).
Crop
Perform crop settings for video output from the camera's 12G-SDI OUT terminal and HDMI OUT / 3G-SDI OUT
terminal.
Setting item
12G-SDI*
HDMI / 3G-SDI*
Target Frame
Frame Display
* Not supported during serial connections (NU Protocol).
Setting values/description
Select Area: Off, Area A, Area B, Area A & B
Assist: Off, Area A, Area B
Setting Phase, Setting Chroma, Setting Area, Setting Y Level: 0 to 31
Revision Level: -50 to +50
Revision Phase: -18 to +18
Color correction for a specific range of tones.
Setting values/description
Off, 300x, 400x, Digital Tele-Converter, Advanced
1.0x, 1.5x, 3.0x, 6.0x
Small, Medium, Large
Off, On, Standard, Powered IS, Standard+Powered IS, Dynamic,
Dynamic+Powered IS
Off, Digital IS, Super16 Digital IS
Setting values/description
Crop Off, Crop 1, Crop 2
Selects the cropping applied to the 12G-SDI OUT terminal's video.
Crop Off, Crop 1, Crop 2
Selects the cropping applied to the HDMI OUT / 3G-SDI OUT terminal's video.
Crop 1, Crop 2
Selects the cropping frame to be adjusted with the cropping frame adjustment mode.
All, Crop 1, Crop 2, Off
Selects the cropping frame to be displayed on the screen.
75