Table of Contents
Advertisement
Selecting a Camera
Select a camera (belonging to the currently selected camera group) to be controlled.
Check that CAMERA select mode is activated (the CAMERA / GROUP lamp illuminates).
1
• If the CAMERA / GROUP lamp is not illuminated, press and hold the SELECT button until the CAMERA /
GROUP lamp illuminates (P. 12).
• When the CAMERA / GROUP lamp is illuminated in blue, press and hold the SELECT button until the lamp
illuminates in green.
Press a CAMERA / PRESET Select button to select the camera to be controlled.
2
• The pressed button will illuminate in orange.
Note
• You can also select cameras with the CAMERA Select button on the camera list screen in the top menu (P. 28). The camera group is
switched automatically.
• During Multi View (PICTURE screen), when [Multi Control] is set to an option other than [Select], you can select a camera by touching the
image on the LCD panel.
Selecting a Preset Group
Up to 100 presets can be registered on a single camera. Starting from number 1, preset groups are assigned in groups of
10 presets, and switching between groups allows you to switch the selected presets.
Press and hold the SELECT button to switch to PRESET / GROUP Select mode (P. 12).
1
• The PRESET / GROUP lamp illuminates in green.
• You can also press a USER button assigned to [CAMERA
Press the SELECT button.
2
• The SELECT button illuminates, and the preset group select mode (PRESET / GROUP lamp illuminated in
blue) will be activated.
• The non-selected CAMERA / PRESET Select buttons illuminate in blue.
Press a CAMERA / PRESET Select button to select a preset group.
3
• The preset group is selected and the corresponding GROUP lamp 1-10 is illuminated.
• PRESET Select mode is activated automatically.
Selecting a Preset
From the device, you can select and execute a preset registered on the currently selected camera.
1
Check that PRESET select mode is activated (PRESET / GROUP lamp illuminates in green).
• If the PRESET / GROUP lamp is not illuminated, press and hold the SELECT button until the PRESET / GROUP
lamp illuminates (P. 12).
• When the PRESET / GROUP lamp is illuminated in blue, press the SELECT button.
Press a CAMERA / PRESET Select button to select the desired preset.
2
• The pressed button will illuminate in orange.
Note
You can also execute presets from the preset list screen in the top menu, or from the [Preset List] tab in the PRESET/TRACE menu (P. 31).
PRESET].
48
Advertisement
Table of Contents
