How To Check This Installation Procedure; Before Connection - Canon ColorPASS-GX400 Installation Procedure

Before Connection > Items to Prepare in Advance

How to Check this Installation Procedure

When Using the Parts Included in the Package
A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Packaged Item
Smbols in the Illustration
The frequently-performed operations are described with symbols in this procedure.
Screw Connector
Tighten Remove Connect
Claw
Insert Remove Push
Checking instruction
Check Visual Check Sound Check
Before Connection > Items to Prepare in Advance
F-1-1
Harness
Disconnect Secure Free
Plug in Turn on
F-1-2

Before Connection

The IP addresses for communication between the host
machine and server are set automatically
1) Enter the Service Mode (level 1).
2) Select COPIER > OPTION > INT-FACE > IMG-CONT > "3".
3) Exit the Service Mode.
Securing space for installation
Secure a space to install this equipment as shown in the figure below. A space of 200 mm or
more is required from the back of this equipment.
Rear
PS Unit
Front
＜Top view＞
Items to Prepare in Advance
• Mouse
• Monitor
• Keyboard
200mm+ (8 in.)
200mm+
(8 in.)
F-1-3
2
2