Camera Connection Settings; Registering Multiple Ip Connected Cameras Automatically - Canon RC-IP1000 User Manual

Camera Connection Settings

Perform connection settings (registration) for the cameras to be controlled by the device, and register them to each
camera's unique number (camera number). You can search for IP connected cameras on the same network as the device
and register them automatically. Each camera can also be registered individually. Cameras connected by serial connection
are configured individually.
A unique number (camera number) is assigned to each camera.

Registering Multiple IP Connected Cameras Automatically

Already set up cameras connected to the same network as the device are registered automatically in one go via IP
connection. Up to 200 cameras (connected via IP connection) can be registered.
Select the SYSTEM menu > [Camera Connection] tab.
1
Select [Auto Registration].
2
• The device searches for set up cameras on the same network and automatically registers cameras that have
not yet been registered.
• Auto Registration is performed sequentially for unused camera numbers*.
* Camera numbers set to SYSTEM menu > [Camera Connect. Details] tab > [Connection Type] > [None].
• You can check the registered cameras from [Registered Camera List].
39