Table of Contents
Advertisement
Setting item
Tally In 1 to Tally In 10
Camera In 1 to Camera In 10
Preset In 1 to Preset In 10
Multi Preset In 1 to Multi
Preset In 4
Camera Out 1 to Camera
Out 10
Group Out 1 to Group Out 5
Note
Tally control information is output only to cameras belonging to the selected group. For other cameras, even if there is input,
information is not output.
Information
Display the device's serial number, firmware version, network information, etc.
Setting item
Firmware Version
Serial Number
MAC Address
IPv4 Address
Subnet Mask
IPv6 Address / Prefix
Setting values/description
Camera 1 to 200 (Camera 1 to 10)
Selects cameras to consider as input when receiving [Tally In] or [Camera In].
Preset 1 to 100 (Preset 1 to 10)
Selects presets to consider as input when receiving [Preset In].
Multi Preset 1 to Multi Preset 5 (Multi Preset 1 to 4)
Selects Multi Presets to consider as input when receiving [Multi Preset In].
Camera 1 to 200 (Camera 1 to 10)
When a camera is selected, [Camera Out] is output or the corresponding camera is
selected.
Group 1 to 20 (Group 1 to 5)
When a group is selected, [Group Out] is output or the corresponding group is
selected.
Setting values/description
Displays the firmware version.
Displays the serial number.
Displays the MAC address.
Displays the IPv4 address.
Displays the subnet mask.
Displays the IPv6 address and prefix.
Advertisement
Table of Contents
