Driver Installation; Software Utility - Advantech PCIE-1810 User Manual

1.3

Driver Installation

The driver package could be found on Advantech Support Portal. Search for PCIE-
1810 on the support portal, then the corresponded driver/SDK package could be
found. You'll get the XNavi installer after the download session finishes.
Execute the installer, then it will guide you through the session. You can choose the
device and software components you'd like to install in the system (Figure 1. 2). After
the selection, click on "start" to begin the installation.
1.4

Software Utility

Advantech offers device drivers, SDKs, third-party driver support and application
software to help fully exploit the functions of your DAQ devices. All these software
packages are available on Advantech website: http://www.advantech.com/.
The Advantech Navigator is a utility that allows you to set up, configure and test your
device, and later stores your settings in a proprietary database.
1. To set up the I/O device for your card, you could first run the Advantech Naviga-
tor program (by accessing Start/Programs/Advantech Automation/DAQNavi/
Advantech Navigator). The settings could also be saved.
2. You can then view the device(s) already installed on your system (if any) on the
Installed Device tree view. If the software and hardware installation are com-
pleted, you will see DAQ devices in the Installed Devices list.
Figure 1.2 XNavi Installation Interface
3 PCIE-1810 User Manual