4.2
Installation of SVGA driver
Complete the following steps to install the SVGA driver. Follow the
procedures in the flow chart that apply to the operating system that
you are using within your PCM-6740.
Important: The following windows illustrations are examples
Note 1:
Note 2:
Note 3:
only. You must follow the flow chart instructions
and pay attention to the instructions which then
appear on your screen.
The CD-ROM drive is designated as "D:" through-
out this chapter.
<Enter> means pressing the "Enter" key on the
keyboard.
When you are using a CRT display, please make
sure that your flat panel resolution settings (in the
BIOS setup) are the same as your VGA resolution
settings (in Windows). Otherwise your display may
behave strangely.
Chapter 4 SVGA Setup
3 7