If The Drying Results Are Not Satisfactory - Electrolux EDH9000W3 User Manual

TROUBLESHOOTING
Problem
The display shows
The display shows Error code
(e.g. E51).
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).

13.1 If the drying results are not satisfactory

• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the appliance.
• The drum is dirty.
• Incorrect setting of the conductivity sensor ( See chapter
Settings - Adjustment of the remaining laundry moisture degree "
"
for better setting).
• The airflow slots are clogged.
40/52
Possible solution
Turn the microwave off. Avoid
using the microwave and the
Remote Control of the oven at
the same time. The micro‐
waves disrupt the Wi-Fi signal.
If you want to set a new pro‐
.
gramme, deactivate and acti‐
vate the appliance.
Make sure that the options are
suitable for the programme.
Deactivate and activate the ap‐
pliance. Start a new pro‐
gramme. If the problem occurs
again, contact the Service cen‐
tre.