Important Safety Instructions Keep a record for quick Thank you for choosing an Electrolux Compact Ventless Dryer. This dryer operates reference on a different drying principle than traditional exhaust ducted dryers. Your new dryer is a condensation, ventless dryer and DOES NOT...
Important Safety Instructions Prevent Fire WARNING • DO NOT dry items that have been previously cleaned in, soaked in, or spotted with Please read all instructions before using this gasoline, cleaning solvents, kerosene, waxes, dryer. or other flammable or explosive substances. Recognize Safety Symbols, Words DO NOT store these items on or near the dryer.
• ALWAYS disconnect the dryer from the electrical supply before attempting any service or cleaning. Failure to do so can result in electrical shock or injury. As an ENERGY STAR Partner, Electrolux ® Major Appliances has determined that this product meets the ENERGY STAR ®...
EFLS210TIS ELFW4222AW NOTE Keep the outlet closed if a compatible Electrolux washer plug is not connected to the dryer. WARNING NOT A GENERAL USE RECEPTACLE! Only for use with compatible Electrolux washer models listed in this Use & Care Guide.
Operating Instructions Normal Operating Sounds You may or may not hear the following sounds from your new dryer: SUSPENSION ROLLERS The dryer drum is supported by a set of suspen- sion rollers. At times there may be a thumping or rolling sound when the dryer starts.
Operating Instructions Operating Your Dryer WARNING To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in this Use & Care Guide before operating your dryer. WARNING WARNING Clean the lint filter and empty the water DO NOT operate dryer without lint filter in container after every load.
Operating Instructions TIPS IMPORTANT STEPS 4. Press the • See Cycle Selection, Cycle Settings, and Cycle DO NOT over-dry. power Options for detailed descriptions of cycle controls. Over-drying can button and cause wrinkles, • See Settings Chart to determine which settings are select the shrinkage, lint, and available for each cycle.
Controls and Settings Cycle Selection Cycle Options / Cycle Status Display Not all cycles, options, or features listed are available on every model. Console shown above for reference only. Your model may differ. Cycle Selection high temperature setting, normal dryness level and eco mode option (if available) on.
Controls and Settings set the cycle. Now your unique my favorite Room temperature and electrical voltage can cycle has been programmed, and you can also affect drying time. retrieve your unique dry program by turning normal the cycle selector to the my favorite cycle Select this Auto Dry cycle for cotton items.
Controls and Settings One of the following indications will appear on WARNING the display: • 0- Standard dry level (factory default) FIRE HAZARD • 1- More dry level (this will increase the To avoid fire hazard, DO NOT dry items time of each cycle by approx.
Controls and Settings NOTE eco mode Select eco mode to run a more eco friendly To change the options once the cycle has cycle with reduced temperature. Cycle times begun (after the start button has been with eco mode selected will be longer. pressed), either rotate the knob to the reset extended tumble position (12 o’clock position) OR press the...
Controls and Settings Other Features Cycle Countdown 3. Maintenance Indicators Delay Start Timer displayed and begin counting down when you control lock select start. A cycle can be delayed up to a To avoid having someone accidentally start or maximum of 6 hours. stop the dryer, press the control lock button.
Care and Cleaning Cleaning the Dryer WARNING To reduce risk of fire or serious injury to persons or property, comply with the basic warnings listed in the Important Safety Instructions and those listed below. • Before cleaning the dryer interior, unplug the electrical power cord to avoid electrical shock hazards.
Care and Cleaning Drying System Clean Lint When the “CLEAN LINT” indicator comes on, Maintenance Procedures follow these steps to clean the filter: Remove the filter by pulling straight up. Empty Water Container Release the latch on the filter grille to (if direct drain kit not installed) open the filter.
Care and Cleaning Cleaning Condenser Grab the condenser handle and pull straight out. Clean Condenser When the “CLEAN CONDENSER” indicator comes on, follow these steps to remove and clean the condenser assembly: Open the dryer door and locate the top of the condenser access door.
Solutions to Common Problems Common Drying Problems Many drying problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory washing results, follow these suggestions provided by The Soap and Detergent Association. PROBLEM POSSIBLE SOLUTIONS PREVENTIVE CAUSES...
Solutions to Common Problems Avoid Service Checklist Before calling for service, review this list. It may save both time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this dryer. OCCURRENCE POSSIBLE CAUSES SOLUTIONS Dryer does not •...
Solutions to Common Problems In some instances, an alarm code will be shown on the display and a tone will be emitted by the unit. The alarm code will be flashed in alternating fashion between the letters “AL” and a specific two-character code.
For the applicable warranty period as set forth below, as measured from your original date of purchase, Electrolux will repair or replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.