Burkert 2300 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. Burkert Manuals
  4. Control Unit
  5. 2300 Series
  6. Quick start manual

Burkert 2300 Series Quick Start Manual

2/2-way angle-seat control valve
Hide thumbs Also See for 2300 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Type
2300
2/2-way angle-seat control valve
Quickstart
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2300 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Burkert 2300 Series

Summary of Contents for Burkert 2300 Series

  • Page 1 Type 2300 2/2-way angle-seat control valve Quickstart English...
  • Page 2 We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques. © Bürkert Werke GmbH & Co. KG, 2013 - 2018 Operating Instructions 1802/03_EU-EN_00810317 / Original DE...

  • Page 3: Table Of Contents

    A detailed description of the device can be found in the oper- ating instructions for Type 2300. The operating instructions can be found on the Internet at: www.burkert.com Definition of term / abbreviation In these instructions, the term “device” always refers to the angle-seat control valve type 2300.

  • Page 4: Symbols

    Typ 2300 Symbols SYMBOLS INTENDED USE DANGER! Non-authorized use of the globe valve Type 2106 may be a hazard to people, nearby equipment and the environment. Warns of an immediate danger! ▶ The device is designed for the controlled flow of liquid and ▶...

  • Page 5: Basic Safety Instructions

    Typ 2300 Basic Safety Instructions BASIC SAFETY INSTRUCTIONS Danger due to loud noises. These safety instructions do not make allowance for any ▶ Depending on the operating conditions, the device may generate loud noises. More detailed information on the likelihood of loud •...

  • Page 6: General Information

    Fax + 49 (0) 7940 - 10 91 448 ▶ Do not make any external modifications to the valves. Do not E-mail: info@burkert.com paint the body parts or screws. International ▶ The exhaust air may be contaminated with lubricants in the Contact addresses are found on the Internet under: actuator.

  • Page 7: Structure And Function

    Typ 2300 Structure and function STRUCTURE AND FUNCTION Actuating function via reciprocal pressurization The angle-seat control valve Type 2300 can be operated only in combination with the following control units: 6.2.2 Flow direction below the seat Positioner Type 8692, 8694, 8696 and 8792; Depending on the version, the valve is closed against the Process controller Type 8693 and 8793.

  • Page 8: Technical Data

    Typ 2300 Technical data TECHNICAL DATA Type label Sealing material Body material Conformity Orifice of the seat / Permitted medium Type 2300 conforms with the EU Directives according to the EU actuator size pressure Declaration of Conformity. Permitted pilot pressure Control function (CF) Standards Type...
  • Page 9 Typ 2300 Technical data Operating conditions 7.4.2 Control medium In conjunction with pneumatic control units (positioner and Observe permitted ranges on the type label of the process controllers), pilot air according to DIN ISO 8573-1 must device! be used: • Class 3 (for water content), 7.4.1 Temperature ranges •...

  • Page 10: Installation

    I (flow below the seat) is dependent on the pressure of the ▶ Before loosening the lines and valves, turn off the pressure medium. and vent the lines. The pressure diagrams are in the operating instructions on the Internet: www.burkert.com english...
  • Page 11 Typ 2300 Technical data Before installation WARNING! • The globe control valve can be installed in any installation Risk of injury from improper installation! position, preferably with the actuator in upright position. ▶ Installation may be carried out by authorised technicians only •...
  • Page 12 Typ 2300 Technical data Remove the control unit from the actuator (if present): NOTE! → Clamp the valve body in a holding device. Damage to the seat seal or the seat contour! → Loosen the fastening screws (2x). ▶ When removing the actuator, ensure that the valve is in open →...
  • Page 13 Typ 2300 Technical data Installation WARNING! WARNING! Danger if incorrect lubricants used! Unsuitable lubricant may contaminate the medium. In oxygen Risk of injury from improper installation! applications there is a risk of an explosion! Assembly with unsuitable tools or non-observance of the tight- ▶...
  • Page 14 Typ 2300 Technical data 8.3.3 Install control unit → Push the control unit, without turning it, onto the actuator until no gap is visible on the form seal. Before installation, check the position of the ports on the control unit and, if required, align the actuator. NOTE! Description see chapter “8.3.4 Rotating the actuator”.
  • Page 15 Typ 2300 Technical data → Place suitable open-end wrench on the hexagon of the 8.3.4 Rotating the actuator actuator. The position of the connections can be aligned steplessly by → Rotate counter-clockwise (as seen from below) to bring the rotating the actuator through 360°. actuator into the required position.
  • Page 16 Typ 2300 Technical data Risk of injury from unsuitable connection hoses! Exhaust air port Hoses which cannot withstand the pressure and temperature range may result in hazardous situations. Pilot air port ▶ Use only hoses which are authorized for the indicated pres- sure and temperature range.

  • Page 17: Packaging, Transport, Storage

    • Ensure the device and packaging are disposed of in an envi- The maintenance and repair instructions are available on ronmentally sound manner! the Internet: www.burkert.com Visual inspection: Perform regular visual inspections according to the application conditions: → Check media connections for leaks.
  • Page 19 www.burkert.com...

This manual is also suitable for:

2300 a 25 m ptfe va

Table of Contents