Burkert 2301 Quick Start Manual
2/2-way globe control valve
Hide thumbs
Also See for 2301:
- Operating instructions manual (112 pages) ,
- Quick start manual (46 pages) ,
- Additional instructions (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for Burkert 2301
Summary of Contents for Burkert 2301
- Page 1 Type 2301 2/2-way globe control valve 2/2-Wege-Geradsitzregelventil Vanne de réglage à siège droit 2/2 voies Quickstart English Deutsch Français...
- Page 2 We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques. © Bürkert Werke GmbH & Co. KG, 2008 - 2020 Operating Instructions 2008/05_EU-ML_00810302 / Original DE...
-
Page 3: Table Of Contents
The Quickstart provides an exemplary description of the installation and start-up of the device. The detailed description of the device can be found in the oper- ating instructions for Type 2301. The operating instructions can be found on the Internet at: www.burkert.com 1.1... -
Page 4: Symbols
Type 2301 Symbols SYMBOLS INTENDED USE Unauthorised use of the Type 2301 globe control valve may be DANGER! dangerous to people, nearby equipment and the environment. Warns of an immediate danger. ▶ The device is designed to control the flow of liquid and gaseous ▶... -
Page 5: Basic Safety Instructions
Type 2301 Basic safety instructions BASIC SAFETY INSTRUCTIONS Risk of injury due to moving parts in the device! ▶ Do not reach into openings in the device. These safety instructions do not take account of any Danger due to loud noises. • contingencies or events which may occur during installation, ▶... -
Page 6: General Notes
▶ The exhaust air can be contaminated by lubricants in the actuator. ▶ Transport, install and remove heavy device only with the aid of a second person and using suitable tools. 5.3 Information on the Internet Operating instructions and data sheets for Type 2301 can be found online at: www.country.burkert.com English... -
Page 7: Structure And Function
Type 2301 Structure and function STRUCTURE AND FUNCTION Closed by spring force in rest position. The Type 2301 globe control valve can only be used in combination with the following control units: Opened by spring force in rest position. Positioner Type 8692, 8694, 8696 and 8792 Process controller Type 8693 and 8793... -
Page 8: Technical Data
Type 2301 Structure and function TECHNICAL DATA CFB/CFI 7.1 Conformity The Type 2301 globe control valve conforms to the EU directives as Marking on the per the EU Declaration of Conformity (if applicable). housing 7.2 Standards Flow direction Fig. 1: F lowdirectionbelowseat(idleon/off,closingagainstmedium) The applied standards, which are used to demonstrate conformity with EU Directives, are listed in the EU-type examination certificate and/or... - Page 9 Tab. 1: Actuatortemperatureranges CE marking Type 1) W henusingacontrolunit,themax.Ambienttemperatureof thiscomponentmustbenotedandadheredto. 2) Pilotairconnectoraspush-inconnector 3) Controlairconnectorasthreadedbushing 2301 B PTFE Kvs4,3 lin PS 16bar Tmed -10...+130°C The globe control valve is suitable for steam Flow 1 see manual for derating W17AL 00297969 sterilisation.
- Page 10 Type 2301 Structure and function Derating pressure and temperature ranges Temperature Medium pressure Usage limits of the valve (derating medium pressure) –10 – +50 °C 14 bar Temperature Medium pressure 100 °C 14 bar –10 – +50 °C 25 bar 150 °C 13.4 bar 100 °C 24.5 bar 200 °C 12.4 bar...
- Page 11 Type 2301 Structure and function 7.4.3 Control medium Medium pressure for control function A Max. sealed medium pressure [bar] In conjunction with pneumatic control units (positioner or Actuator process controller), pilot air as per DIN ISO 8573-1 must be size Steel/steel PTFE/steel PEEK/steel used: [mm] •...
-
Page 12: Installation
Type 2301 Installation INSTALLATION Pilot pressure for control function B The required minimum pilot pressure P for control function B and I (flow direction below seat) depends on the medium 8.1 Safety instructions pressure. DANGER! The pressure graphs can be found in the operating Risk of injury from high pressure in the system! instructions on the Internet at www.country.burkert.com... - Page 13 Type 2301 Installation Uninstall the control unit from the actuator (if present): CAUTION! → Clamp valve body into a collet. Risk of injury due to heavy device. → Loosen fastening screws (2 x). During transportation or installation work, a heavy device may →...
- Page 14 Type 2301 Installation Dirt trap for devices with approval according to EN 161 Exhaust port Install collet: According to EN 161 "Automatic shut-off valves for gas burners CFA, CFB and gas appliances", a dirt trap, which prevents the penetration of Pilot air port CFI a 1 mm test pin, must be installed upstream of the valve.
- Page 15 Type 2301 Installation 8.3.3 Install control unit → Before re-installation, grease nipple thread of the actuator (e.g. using Klüberpaste UH1 96-402 from Klüber). Before installation, check the state of the control unit NOTE! connections and align the actuator if necessary. For a description see chapter “8.3.4 Turning actuator”.
- Page 16 Type 2301 Installation 8.3.4 Turning actuator NOTE! The position of the ports can be smoothly aligned by turning the Excessive torque when tightening the fastening screw actuator 360°. cannot ensure the degree of protection IP65/IP67! ▶ The fastening screws must only be applied with a maximum Only the actuator can be rotated.
- Page 17 Type 2301 Installation → Place a suitable open-end wrench on the hexagon head of the WARNING! actuator. For control function I – risk of pilot pressure failure! → Move the actuator into the required position by turning it counterclockwise (seen from below).
- Page 18 Type 2301 Installation 8.6 Disassembly For usage in an aggressive environment, we rec- ommend using a pneumatic hose to drain all free pneu- DANGER! matic ports in a neutral atmosphere. Risk of injury from discharge of pressure and escaping medium! Exhaust air port...
-
Page 19: Transportation, Storage, Disposal
Type 2301 Transportation, storage, disposal TRANSPORTATION, STORAGE, Visual inspection: According to the usage conditions, perform regular visual DISPOSAL inspections: NOTE! → Check medium ports for tightness. Damage from transport and storage! → Check relief bore on the pipe for leaks. • Protect the device against moisture and dirt in shock-re- sistant packaging during transportation and storage. - Page 21 www.burkert.com...
Need help?
Do you have a question about the 2301 and is the answer not in the manual?
Questions and answers