Pressure Regulation (Tornado Lance); Pressure Regulation (Variopress Gun); Using Cleaning Agents - Nilfisk-Advance MH 7P Instructions For Use Manual

english 4.2.2 Steam operation (over
100°C (212°F))
4.3 Pressure regulation
(Tornado Lance)
4.4 Pressure regulation
(VarioPress Gun)
4.5

Using cleaning agents

A
8
1)
3%
B
5%
ca.
CAUTION!

Never allow cleaning agent
to dry on the surface to be
cleaned. The surface may be
damaged.
The percentage shown in the
illustration are only approximate
data.
1% 1%
3%
5%
ca.
1. Open cabinet (and service door
if desired - see chapter 3.6, Step
1+2).
2. Turn the twist grip on the safety
control block all the way to the left
(counter- clock wise-direction).
3. Turn the main switch to position
.
4. Select temperature (over 100°C
(212°F)).
For special applications: replace the
standard nozzle with the steam spray
nozzle (accessory).
1. Turn the twist grip on the spray
unit:
– High pressure =
clockwise (+) for high pres-
sure
– Low pressure =
counter-clockwise (–) for low
pressure.
1. Turn the twist grip on the spray
unit:
Water volume
(–)
min.
1. Select desired detergent (A)
or (B) and amount by turning
the knob to desired percent-
age.
2. Spray the object to be cleaned.
3. Allow the cleaning agent to
work, depending on the de-
gree of soiling. Then rinse off
with high pressure.
For special applications such as
disinfection, the exact detergent
concentration has to be deter-
mined by using a graduated
measuring container. For water
outlet volume of the machine see
chapter 9.3 technical data.
1) Options / model variants
Original instruction
(+)
max.