Subscribe to Our Youtube Channel
Related Manuals for Nilfisk-Advance MH PE Series
Summary of Contents for Nilfisk-Advance MH PE Series
- Page 1 MH PE/DE Instructions for use 106269015 H (03. 2018) EN - DE - FR - NL - IT - NO - SV - DA - JA...
- Page 2 Instruction manual ......................3 - 20 Betriebsanleitung ....................... 21 - 38 Manuel d’Instructions......................39 - 56 Gebruikershandleiding....................... 57 - 74 Manuale di istruzioni ......................75 - 92 Bruksanvisning ........................93 - 110 Bruksanvisning ........................111 - 128 Brugsvejledning ......................... 129 - 146 取扱説明書...
- Page 3 MH 7P-220/1120 PE MH 5M-200/1000 DE...
- Page 4 MH 7P-200/1200 DE MH 7P-220/1300 DE...
-
Page 5: Table Of Contents
MH PE/DE Contents Important safety instructions .......................4 Description .............................5 2.1 Purpose ............................5 2.2 Operating elements ........................5 Before starting the machine......................6 3.1 Transport and assembly ......................6 3.2 Set the brake (only machines with wheels ................6 3.3 Fill up fuel tank .........................6 3.4 Connecting the high pressure hose ..................7 3.5 Connecting the water supply ....................7 Control / Operation ........................8... -
Page 6: Important Safety Instructions
MH PE/DE Symbols used to mark in- Safety instructions This indicates structions in these operat- tips and in- ing instructions structions to sim- Before using the which must be plify work and to high-pressure observed to ensure safe operation. cleaner, be sure prevent risks to persons are to also read the marked with this danger symbol. -
Page 7: Description
MH PE/DE 2 Description Purpose This high-pressure cleaner has etc. been designed for professional use in Section 5 describes the use of the high-pressure cleaner for - Agriculture various cleaning jobs. - Industry - Transport industry Always use the cleaner as - Automotive described in these operating - Municipal Facilities... -
Page 8: Before Starting The Machine
MH PE/DE 3 Before starting the machine Transport and assembly the burner may be necessary to take account of altitude and the resulting air pressure. This is true whether your fuel is ‘Natural gas’, Propane or Diesel. Your Nilfisk hot water pressure washer was thoroughly tested and adjusted for optimum per- formance before it left our fac-... -
Page 9: Connecting The High Pressure Hose
MH PE/DE to 7% bio diesel) can be used If the machine is to be opera- the fuel oil begins to solidify with the following restrictions: ted at fuel stations or in other (paraffin precipitation). This can Maximum storage time in high potentially hazardous areas, lead to difficulties in starting pressure cleaner diesel tank: 1... -
Page 10: Control / Operation
MH PE/DE 4 Control / Operation Connections 1. Pull the blue quick-release 4.1.1 Connecting the spray grip (A) of the spray gun lance to the spray gun backwards. 2. Insert the nipple of the spray lance (B) into the quick-re- lease connection and release 3. -
Page 11: Switching On The Cleaner
MH PE/DE Switching on the Before starting up the engine, cleaner you must carefully read through 4.3.1 Cold water operation the instructions for use of the engine. In the instructions for use the operation and service of the engine is described. When the engine has been started, the high pressure wash- er can be used for cleaning with... -
Page 12: Applications And Methods
MH PE/DE 5 Applications and methods Techniques Effi cient high pressure cleaning is achieved by following a few guidelines, combined with your own personal experience of specifi c cleaning tasks. Accessories and detergents, when correctly chosen, can increase the effi ciency of your pressure washer. Here is some basic information about cleaning. -
Page 13: Some Typical Cleaning Tasks
MH PE/DE Some typical cleaning tasks 5.2.1 Agriculture Task Accessories Method Stables Chemical Foam Injec- 1. Soaking – apply foam to all surfaces (bottom to top) Pig Pens, Sties tors and wait for approx. 30 minutes. Foam lance 2. Remove the dirt from surfaces with the high pres- Powerspeed lance Cleaning of walls, sure lance or chosen accessory. - Page 14 MH PE/DE 5.2.3 Buildings and Equipment Task Accessories Method General surfaces Foam injectors Stand- 1. Apply thick foam over the surfaces to be cleaned. ard lance Apply on dry surfaces. Apply from top to bottom on Curved lances Metallic equipment vertical surfaces.
-
Page 15: After Using The Cleaner
MH PE/DE 6 After using the cleaner Switching off the 1. Close water tap cleaner 2. Activate spray handle without lance in order to empty all residual water in the system. 3. Turn the ON/OFF switch to position “OFF”. 4. Turn off the engine. 5. -
Page 16: Maintenance
MH PE/DE 7 Maintenance Maintenance Schedule MH 5M-200/1000 DE Every six only months or Weekly After the fi rst 50 500 operating required operating hours hours 7.2.1 Water fi lters 7.2.2 Oil fi lter 7.2.3 Checking the pump oil quality ... - Page 17 MH PE/DE MH 5M: 7.2.3 Change of oil 1. Loosen oil container by opening the clip. Hold the oil container into a container until all oil has run out of the pump. 2. Remount oil container and top up with new oil. It may take some time for the oil level to equalize in the pump and the oil container.
- Page 18 MH PE/DE 7.2.6 Flame sensor 1. Remove the sensor and clean with a soft cloth. 2. Confi rm that the sensor is correctly seated when rein- stalling. Original Instructions...
-
Page 19: Troubleshooting
MH PE/DE 8 Troubleshooting Indications on Display Indication light Cause Remedy > Appliance ready for operati- Green LED When switching on, all the LEDs light up once. > Fuel shortage • Top up with fuel Yellow LED Cold water operation possible >... -
Page 20: Other Faults
MH PE/DE Indication light Cause Remedy > Flame sensor sooted • Clean flame sensor (see sec- Green LED flashes tion 7.2.6). slowly and red LED > Ignition or fuel system failure Contact Nilfisk Service flashes rapidly Cold water operation possible Other faults Fault Cause... -
Page 21: Further Information
MH PE/DE 9 Further information Recycling the machine Make the old cleaner unusable valuable materials that should immediately. be recycled. 1. Unplug the cleaner and cut Contact your local waste dispo- the power cord. sal site. If you have any queries, please contact your local autho- The pressure washer contains rities or your nearest dealer. -
Page 22: Technical Specifications
MH PE/DE Technical Specifications MH 7P- MH 5M- MH 7P- MH 7P- 220/1120 200/1000 200/1200 220/1300 Item no. 106239530 106239610 106239630 106239635 Pump pressure mQuic 1010 1150 1200 Qmax 1120 1000 1200 1300 Nozzle 0500 0450 0640 0640 Suction capacity dry Max. - Page 23 HEAD QUARTER GERMANY PERU TURKEY Nilfi sk GmbH Nilfi sk S.A.C. Nilfi sk A.S. DENMARK Guido-Oberdorfer-Straße 2-10 Calle Boulevard 162, Of. 703, Lima 33- Serifali Mh. Bayraktar Bulv. Sehit Sk. No:7 Nilfi sk A/S 89287 Bellenberg Perú Ümraniye, 34775 Istanbul Kornmarksvej 1 Tel.: (+49) (0)7306/72-444 Lima...
Need help?
Do you have a question about the MH PE Series and is the answer not in the manual?
Questions and answers